Horse Trailers / Livestock Trailers

We have all types of livestock trailers available. We have horse trailers, cattle trailers, hay haulers, and much more.

Sizes: Ranging from 16 ft. - 40ft. in length and 6ft. to 8 ft. in width

Gooseneck or Bar Top

If you are a new dealer please click the orange ribbon below that says New Dealer Registration. If you already have your password please click Dealer Login below.

Standard Features

2 5/16” Gooseneck Coupler
4” Channel on 4’ Center Cross Members
Heavy Duty Center Gate with vertical runners and slam latch
(2) 7000lb on 28’ and below
(3) 3” Channel Runners
Heavy Duty Butterfly Rear Gate with Pipe Latch
(3) 7000lb on 30’ and above
12000lb Drop Leg Jack-Springs Loaded
Heavy Duty 3x5 Tubing Upright Rear Opening
All Brake Axles
2” Pressure Treated Pine
Steel Tube Bumper
Torflex Suspension
Open Sides with 1x3 Tubing Runners
3/16” Solid Steel Plate Brush Fenders
ST235 16” Radial- 8 Lug Tires
Steel Pipe Bows Side Uprights
14 Gauge Wiring
Full Spare Tire with Carrier
36” Wide, Escape Door, Passenger Side
Rust Resistant Epoxy Primer
3x3 Angle Frame
Pipe Bows with Steel Rods Roof
Baked on High Solid Urethane Paint
8” Channel Gooseneck on 14K
6” Roof Radius
7-Way Bergman Plug
D.O.T. Reflective Taping
10” Channel Gooseneck on 21K
Open Cage Nose
3/8” Safety Chains with Latches
Emergency Breakaway Switch
6” Channel Pope Bow Uprights
Width: 6’ 8”
DOT Required Lighting plus Wuad Tail Lights
Battery Brake Backup
1 Center Gate on 16’, 18’, 20’
Height: 6’ 6”
Deck Height: Approximately 14”
Flush Mount LED Lights
2 Gates on 24’ to 36’
Wiring Enclosed in Conduit

Standard Features

2 5/16” Ram Coupler
2 Rows of Floor Screws
Tongue: 5” Channel
Jack: 2000lb
DOT Reflective Tape
4” Slat Sides
Fenders: 9x72
Ultra Lube Hubs
Butterfly Rear Gate
Floor: 2” Untreated Pine
Frame: 3x2x3/16 with V-Crimp Sides
Open Bar Top
Brake: 2 Wheel
Crossmembers: 3 Rows ( Running Length)
Spare Rack
Break Away Unit with Charger